Measurement Computing GPIB-488.2 - Manual (Page 16)

2-8 API Cross-Reference 986992 GPIB 488.2 Porting Guide
MCC to IOtech GPIB 488.2 Cross-Reference
MCC GPIB 488.2
Library Routine IOtech GPIB
API Reference Comments
1 AllSpoll SPollList
SPoll
AllSpoll performs a serial poll on all specified
devices.
2 DevClear Clear
UnListen
UnTalk
DevClear – clears one device
3 DevClearList ClearList DevClearList – Clears specified devices
4 EnableLocal LocalList
Local EnableLocal – Places specified devices in local
mode.
5 EnableRemote AutoRemote
Listen
MyListenAddr
RemoteList
Remote
EnableRemote uses short addresslist to identify the
remote devices
6 FindLstn FindListeners
CheckListener FindLstn – Finds all Listeners on the GPIB
7 FindRQS SPoll
SPollList
Status FindRQS – Identifies the device requesting service.
8 PassControl
NO EQUIVALENT
PassControl – Makes another specified device the
Active Controller.
9 Ppoll Ppoll Performs a parallel poll.
10 PPollConfig PPollConfig Configures a device for parallel polls.
11 PPollUnconfig PPollDisable
PPollDisableList
PPollUnconfig
Unconfigures devices for parallel polls.
12 RcvRespMsg EnterX RcvRespMsg – Reads data from a previously
addressed device.
13 ReadStatusByte Status ReadStatusByte – Serial poll a single device and
read its status byte.
14 Receive EnterX
Enter
EnterN
EnterMore
EnterNMore Receive - Reads data from a GPIB device