Measurement Computing GPIB-488.2 - Manual (Page 17)

GPIB 488.2 Porting Guide 986992 API Cross-Reference 2-9
MCC to IOtech GPIB 488.2 Cross-Reference
MCC GPIB 488.2
Library Routine IOtech GPIB
API Reference Comments
15 ReceiveSetup Talk ReceiveSetup - Addresses a GPIB Interface Board as
a listener and a GPIB device as a Talker, in
preparation for data transmission. Compare to
SendSetup.
16 ResetSys Reset
Abort
RestSys – Initializes GPIB System.
17 Send SendData
OutputX
Output
OutputN
OutputMore
OutputNMore Send – Sends data to only 1 GPIB device.
18 SendCmds SendCmd SendCmds sends GPIB commands.
19 SendDataBytes OutputX
SendData
SendDataBytes – sends data to previously addressed
devices
20 SendIFC Abort SendIFC – Clears GPIB bus by asserting IFC
(Interface Clear) line.
21 SendList OutputX
SendData SendList - Sends data to multiple GPIB devices.
22 SendLLO Lol SendLLO – Sends Local Lockout (LLO) message to all
GPIB devices.
23 SendSetup Listen
MyTalkAddr
Talk
SendSetup - Addresses a GPIB Board as a Talker
and specified GPIB devices as Listeners. Compare to
Receive Setup.
24 SetRWLS Lol Puts all devices in Remote state with Local Lockout
and addresses specified as Listeners.
25 TestSRQ ControlLine
(Limited applicability) Tests (evaluates) the SRQ line
26 TestSys Hello
(Limited applicability) Compare to API “Hello”
27 Trigger Trigger Triggers one device.
28 TriggerList TriggerList Triggers multiple devices.
29 WaitSRQ
NO EQUIVALENT
Wait until a device asserts SRQ.