Measurement Computing Serial488A User Manual
Page 7
1.5
Data Format:
Selectable 7 or 8 data bits; 1 or 2 stop bits; odd, even, mark,
space and no parity on transmit.
Duplex:
Full with Echo/No Echo.
Serial Control:
Selectable CTS/RTS or XON/XOFF.
Terminators:
Selectable CR, LF, LF-CR and CR-LF.
Connector:
25-pin Sub-D male. DCE Configured.
General
Terminal Installation Category: Standard: Not Applicable
CE: Category 1 for all terminals.
Data Buffer:
32,000 characters dynamically allocated.
Indicators:
LEDs for IEEE Talk and Listen, Serial Send and Receive, and
Power.
Power:
An external power supply is provided with the Serial488A.
Input is 105 to 125VAC; 50 to 60 Hz, 10 VA Maximum.
Dimensions:
188mm deep x 140mm wide x 68mm high (7.39" x 5.5" x
2.68").
Weight:
1.55 kg. (3.6 lbs).
Operating Environment:
Standard: Indoor use, 0° to 50°C; 0 to 70% R.H. to 35°C.
Linearly derate 3% R.H./°C from 35° to 50°C.
CE:
Indoor use at altitudes below 2000m, 0° to 40°C; 80% maximum
RH up to 31°C decreasing linearly 4% RH/°C to 40°C.
Controls:
Power Switch (external), IEEE and Serial parameter switches
(internal). Jumper selection of RS-232 or RS-422 operation
(internal).
*Specifications subject to change without notice
.