Measurement Computing USB-2404-UI - Manual (Page 8)

8
Chapter 2
Installing the USB-2404-UI
What comes with your USB-2404-UI shipment?
As you unpack your USB-2404-UI, verify that the following components are included.
Hardware
 USB-2404-UI
 USB cable (2 meter length)
Documentation
In addition to this hardware user's guide, a Quick Start Guide booklet is included with the USB-2404-UI
shipment. This booklet provides an overview of the MCC DAQ software you received with the device, and
includes information about installing the software. Please read this booklet completely before installing any
software or hardware.
Optional accessories
 ACC-164 — Six-position screw terminal connector blocks (quantity four).
 ACC-176 — Backshell for use with the ACC-164 six-position spring terminal connector blocks. Provides
strain relief and operator protection from high-voltage signals (quantity four).
Unpacking
As with any electronic device, you should take care while handling to avoid damage from static
electricity. Before removing the USB-2404-UI from its packaging, ground yourself using a wrist strap or by
simply touching the computer chassis or other grounded object to eliminate any stored static charge.
If your USB-2404-UI is damaged, notify Measurement Computing Corporation immediately by phone, fax, or
e-mail.
 Phone: 508-946-5100 and follow the instructions for reaching Tech Support.
 Fax: 508-946-9500 to the attention of Tech Support
 Email: [email protected]
For international customers, contact your local distributor. Refer to the International Distributors section on our
web site at
www.mccdaq.com/International .
Installing the software
Install Universal Library and InstaCal when you want to develop data acquisition applications using Windows
programming languages.
Universal Library and InstaCal software are included on the CD that ships with the device. Refer to the Quick
Start Guide booklet for instructions about installing Universal Library and InstaCal software.
Installing the hardware
Install the software before you install your device
A driver needed to run the USB-2404-UI device is installed when you install the software. Therefore, you need
to install the software package you plan to use before you install the hardware.
For operation on a Windows operating system, we recommend that you run Windows Update to update your
operating system with the latest USB drivers.