Measurement Computing PCI-DUAL-AC5 - Manual (Page 17)

17
Chapter 4
Specifications
Typical for 25 °C unless otherwise specified.
Specifications in italic text are guaranteed by design
Power consumption
Table 1. Power consumption specifications
+5V Operating 1.13 A typical, 1.80 A max
Digital Input / Output
Table 2. Digital I/O specifications
Digital type (main connector) 8255 mode 0 emulation
Output 74S244
Input 74LS373
Configuration 4 banks of 8, 4 banks of 4, programmable by bank as input or output
Number of channels 48 I/O
Output high 2.4 volts min @ -15 mA
Output low 0.5 volts max @ 64 mA
Input high 2.0 volts min, 7 volts absolute max
Input low 0.8 volts max, -0.5 volts absolute min
Power-up / reset state Input mode (high impedance)
Miscellaneous Locations provided for installation of pull-up or pull-down resistors
Environmental
Table 3. Environmental specifications
Operating temperature range 0 to 70 °C
Storage temperature range -40 to 100 °C
Humidity 0 to 90% non-condensing
Mechanical
Table 4. Mechanical specifications
Card dimensions 174.8 mm (L) x 106.7 mm (W) x 21.6 mm (H)
6.88" (L) x 4.2" (W) x 0.85" (H)
Main connector and pin out
Table 5. Main connector specifications
Connector type 100-pin high density
Compatible cables C100FE-x cable
C100FF-x cable
Compatible accessory products
with the C100FE-x cable SSR-PB24 (2)
Compatible accessory products
with the C100FF-x cable CIO-MINI50 (2)
CIO-SPADE50 (2)
CIO-TERM100 (1)
SCB-50 (1)