Specifications, Digital input / output, Power consumption – Measurement Computing PCI-DIO96H User Manual
Page 17: Environmental, Mechanical

17
Chapter 4
Specifications
Typical for 25 °C unless otherwise specified.
Specifications in italic text are guaranteed by design.
Digital input / output
Table 1. Digital I/O specifications
Digital type
8255 emulation, Mode 0
Output
74S244
Input
74LS373
Configuration
8 banks of 8, 8 banks of 4, programmable by bank as input or output
Number of I/O
96
Output high
2.4 volts min @ -15 mA
Output low
0.5 volts max @ 64 mA
Input high
2.0 volts min, 7 volts absolute max
Input low
0.8 volts max, -0.5 volts absolute min
Power-up / reset state
Input mode (high impedance)
Pull-up/pull-down resistors
SIP resistor locations provided for pull-up or pull-down configuration.
Power Consumption
Table 2. Power consumption specifications
+5V Operating
2.1 A typical, 3.4 A max
Environmental
Table 3. Environmental specifications
Operating temperature range
0 to 50 °C
Storage temperature range
-20 to 70 °C
Humidity
0 to 90% non-condensing
Mechanical
Table 4. Mechanical specifications
Card dimensions
292.1 mm (L) x 106.6 mm (H) x 14.5 mm (W)