Measurement Computing DASYLab Getting Started - Manual (Page 5)

Install InstaCal
5
Operating systems
You must have administrator rights on your account using one of the
following operating systems:
 Windows® 8 64-bit (as 32-bit application)
 Windows 8 32-bit
 Windows 7 64-bit (as 32-bit application)
 Windows 7 32-bit
 Windows Vista® 64-bit (as 32-bit application)
 Windows Vista 32-bit
 Windows XP Pro with Service Pack 2
Install InstaCal
Install InstaCal from the Measurement Computing Data Acquisition
Software CD that shipped with your device.
You must be logged in as an administrator to install InstaCal.
Connect your MCC USB device to its signal source
Refer to your MCC device user's guide for instructions on installing and
connecting the device to an analog signal source.
Connect the wires from the device to the signal source so that the device
acquires signals from analog channel 0.
All MCC user's guides are available on the Measurement Computing Data
Acquisition Software CD that shipped with your device. User's guides are
also on the MCC Product Manuals Page at
www.mccdaq.com/manuals.aspx .