Measurement Computing BTH-1208LS - Manual (Page 29)

Declaration of Conformity
Manufacturer: Measurement Computing Corporation
Address: 10 Commerce Way
Suite 1008
Norton, MA 02766
USA
Category: Electrical equipment for measurement, control and laboratory use.
Date of Issue:
June 24, 2013
Measurement Computing Corporation declares under sole responsibility that the product
BTH-1208LS
to which this declaration relates is in conformity with the relevant provisions of the following standards or other documents:
 EMC Directive 2004/108/EC: General Requirements, EN 61326-1:2006 (IEC 61326-1:2005)
 The Radio and Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC
 EMC Standard for Radio Equipment and Services EN 301-489-1 / EN 301-489-17
 EMC Standard for Wideband Transmission Systems EN 300-328
 Essential Health and Safety Requirement of the Low Voltage Directive 2006/95/EC
Emissions:
 EN 55011 (2009) + A1:2010/ CISPR 11(2009) + A1:2010: Radiated emissions: Group 1, Class A
 EN 55011 (2009) + A1:2010/ CISPR 11(2009) + A1:2010: Cond. emissions: Group 1, Class A
 EN 61000-3-2 (2006) + A2:2009: Harmonic Current Emissions, Class A
 EN 61000-3-3 (2008): Voltage Fluctuations and Flicker in Low Voltage, Class A
Immunity: EN 61326-1:2006, Table 3.
 IEC 61000-4-2 (2008): Electrostatic Discharge immunity.
 IEC 61000-4-3 (2010): Radiated Electromagnetic Field immunity.
 IEC 61000-4-4 (2012): Electric Fast Transient Burst Immunity.
 IEC 61000-4-5 (2005): Surge Immunity.
 IEC 61000-4-6 (2008): Radio Frequency Common Mode Immunity.
 IEC 61000-4-11 (2004): Voltage Interrupts.
Supplementary Information:
 This product meets the EMC requirements of the United States (FCC Part 15, Class A), Canada (ICES-001,
Group 1, Class A), and Australia/New Zealand (AS/NZS CISPR 11, Group 1, Class A).
 This product meets IEC61010-1, UL 61010-1, and CSA 61010-1 safety standards.
To maintain compliance to the standards of this declaration, the following conditions must be met.
 The host computer, peripheral equipment, power sources, and expansion hardware must be CE compliant.
 All I/O cables must be shielded, with the shields connected to ground.
 I/O cables must be less than 3 meters (9.75 feet) in length.
 The host computer must be properly grounded.
 Equipment must be operated in a controlled electromagnetic environment as defined by Standards EN 61326-1:2006, or
IEC 61326-1:2005.
Declaration of Conformity based on tests conducted by Chomerics Test Services, Woburn, MA 01801, USA in June, 2013.
Test records are outlined in Chomerics Test Reports #EMI6320A.13and #TR6320B.13.
We hereby declare that the equipment specified conforms to the above European Community Directives and Standards.
Carl Haapaoja, Director of Quality Assurance