Measurement Computing BTH-1208LS - Manual (Page 10)

BTH-1208LS User's Guide Installing a BTH-1208LS
10

Bluetooth connection status notifications – You can set values that indicate when the device is
connected over Bluetooth, and when the Bluetooth connection terminates. Connected and disconnected
values can be set for digital outputs, analog output channel 0, and analog input channel 1

Auto shutdown – When the device is powered by batteries, you can configure the device to power down a
specified amount of time after the Bluetooth connection terminates.

Battery charging – When the device is powered by rechargeable batteries, you can configure the device to
recharge batteries from the USB power supply when connected over Bluetooth.
Calibrating the hardware
Factory calibration
The Measurement Computing Manufacturing Test department performs the initial factory calibration. Return
the device to Measurement Computing Corporation when calibration is required. The recommended calibration
interval is one year.
Field calibration
Field calibration is not supported.