Definitions and abbreviations – MEGA Corp. MCC-OPS-1 User Manual
Page 4
MCC35-CAT735-1
5 Aug 2010
SECTION 1
Definitions and Abbreviations
Contents
1-1
Manual Usage …………………..………. 1-1
Warning, Caution & Notes ……….…...… 1-1
Shall, Will, May ……………………….. 1-1
MCC35 Overview …………………..… 1-2
Abbreviations ………………………...... 1-3
MANUAL USAGE
This
technical
manual
only
contains
information required to safely operate the
MEGA Container Carrier (MCC) system when
installed on the CAT 735. See the CAT 735
Operators Safety and Maintenance Manual for
chassis specific system information and
operating procedures.
Only current production systems are covered in
this manual. If your system is not covered in
this manual please contact MEGA Corp.
Product Support at: 1-800-345-8889 or visit our
web site at
for more
detailed information.
WARNING, CAUTIONS AND
NOTES
The following definitions are found throughout
the manual and apply as follows:
Operating procedures and techniques, which
could result in personal injury and/or loss of
life if not carefully followed.
Operating procedures and techniques, which
could result in damage to equipment if not
carefully followed.
Operating procedures and techniques that are
considered essential to emphasis.
USE OF SHALL, WILL AND MAY
Shall and Will – Used when application of a
procedure is mandatory.
Should – Used when application of a
procedure is recommended.
May - Used to indicate an acceptable or
suggested means of accomplishment.