MEGA Corp. MCC-OPS-1 - Manual (Page 20)

MCC35-CAT735-1
5 Aug 2010
SECTION 3
Normal Operations
3-3
10. Container - LOADED
11. Hoist Lever – FLOAT
The body must be in the FLOAT position
when driving the machine. If the hoist
control lever is in any position except
FLOAT, the transmission will remain in
FIRST gear. Normal gear shifting will not
take place until the hoist control lever is
moved to the FLOAT position.
12. Twistlock Switch – ENGAGE
13. Twistlock In-Cab Light – ON
If the twistlock indicator lamp is flashing,
move the twistlock activation switch to the
DISENGAGE position and wait for the
indicator lamp to remain OFF. Then move
the switch to the ENGAGE position and
wait for the lamp to be illuminated. If after
cycling the activation switch does not
illuminate the light discontinue use of the
MCC35.
14. Twistlock External Beacon – OFF
15. Tailgate – CLOSE. Use remote
switches to position the tailgate.
Any restraining devices (e.g. chains, straps)
used on container doors for transport must
be removed after tailgate is positioned
against container door prior to dumping
operations.
16. Parking Brake – OFF
17. Gear Selector Lever – As Required
18. Move away from loading area.
CONTAINER DUMPING
1. Vehicle
- Position for container
dumping.
2. Gear Selector Lever – As Required
3. Parking Brake – As Required
4. Tailgate – DOWN. Use hoist lever or
remote switches to position the tailgate.
Any restraining devices (e.g. chains, straps)
used on container doors for transport must
be removed after tailgate is positioned
against container door prior to dumping
operations.
5. Hoist Lever – RAISE. Hold in the raise
position until the bed stops
automatically.
6. Hoist Lever & Override Switch – As
Required. Use the override system as
required to dump the entire load.
7. Hoist Lever – LOWER. Ensure the bed
assembly is fully lowered and the bed
position light extinguishes.
If required, install restraining devices (e.g.
chains, straps) to keep container doors
closed for transport before the tailgate is
raised.
8. Tailgate – UP. Use remote switches to
position the tailgate.