MEGA Corp. MCC-OPS-1 - Manual (Page 21)

MCC35-CAT735-1
5 Aug 2010
SECTION 3
Normal Operations
3-4
9. Hoist Lever – FLOAT
The body must be in the FLOAT position
when driving the machine. If the hoist
control lever is in any position except
FLOAT, the transmission will remain in
FIRST gear. Normal gear shifting will not
take place until the hoist control lever is
moved to the FLOAT position.
10. Parking Brake – As Required
11. Gear Selector Lever – As Required
12. Vehicle – Exit dumping area
CONTAINER UNLOADING
1. Body Assembly – DOWN. Ensure bed
position light is off.
2. Tailgate – DOWN. Use hoist lever or
remote switches to position the tailgate.
3. Hoist Lever – FLOAT
4. Position Vehicle – As Required for
Unloading
5. Gear Selector Lever – N (Neutral)
6. Parking Brake - As Required
7. Twistlock Switch – DISENGAGE
8. Twistlock In-Cab Light – OFF
9. Twistlock external status beacon (Blue)
- ON
10. Container - UNLOAD
11. Twistlock Switch – As Required
12. Depart unloading area.
AFTER OPERTIONS
Perform this inspection at the end of the day or
end of a shift.
1. Paring Brake – ON
2. Gear Selector Lever – As Required
3. Vehicle – Shutdown
4. Hoist Lever As Required
5. Twistlock Switch – As Required
6. LT Side Bed Assembly and Components –
Security, Damage and Leaks
7. Rear Bed Assembly and Accessories –
Security, Damage and Leaks
8. RT Side Bed Assembly and Components –
Security, Damage and Leaks
9. Hydraulic Tank - Serviced