MEGA Corp. MCC-OPS-1 - Manual (Page 28)

MCC35-CAT735-1
5 Aug 2010
SECTION 4
Appendix
4-7
MCC35-CAT735(CL)-1
5 Aug 2010
Under certain operating conditions, the combination
of hydraulic oil for the brake system in conjunction
with the hoist system may create a slight pressure
differential across the piston heads in the hoist
cylinders. If the hoist lever is left in the FLOAT
position with this pressure differential present, the bed
will gradually return the body over the center of
balance of the pivots and the body will lower onto the
chassis. Proper use of the RAISE, HOLD, LOWER
and FLOAT positions of the hoist control is
important for the correct operation of the machine or
damage to the machine may result.
CONTAINER LOADING
1. Body Assembly – DOWN. Ensure bed position light
is OFF.
2. Tailgate – DOWN. Use hoist lever or remote
switches to position the tailgate.
3. Hoist Lever – FLOAT
4. Twistlock Switch – DISENGAGE
N-6