MEGA Corp. MCC-OPS-1 - Manual (Page 24)

MCC35-CAT735-1
5 Aug 2010
SECTION 4
Appendix
4-3
MCC35-CAT735(CL)-1
MCC35-CAT735(CL)-1
5 Aug 2010
BEFORE OPERATIONS
These procedures are used to perform a walk-around
inspection of the MCC35 system before use or the
beginning of a shift. This inspection requirement is in
addition to and does not replace the vehicle manufacture’s
inspections.
Ensure all safety information, warnings and instructions
are read and understood before any operation or
maintenance procedures are performed. Ensure proper
safety procedures are used when operations the MCC35.
Failure to use proper safety procedures and equipment
may cause serious personnel injury or death.
Power OFF
1. Chocks – Set As Required
2. Vehicle Parking Brake – ON
3. Gear Selector Lever – N (Neutral)
4. In Cab Controls – Set As Required
N-2