Marantz ST7001N - Manual (Page 30)

26
ENGLISH OTHER OPERATION
Use the TUNING/PRESET knob !4 or pressing the
CHANNEL/CONTROL button ⁄4 to select the last day.
Then press the TUNING/PRESET knob !4 or
ENTER button v .
10. Set the On time.
q Either turn the TUNING/PRESET knob !4 or press
the CHANNEL/CONTROL button ⁄4 to adjust the
hour for the On time and press the TUNING/PRESET
knob !4 or ENTER button v .
w Either turn the TUNING/PRESET knob !4 or press
the CHANNEL/CONTROL button ⁄4 to adjust the
minutes for the On time and press the
TUNING/PRESET knob !4 or ENTER button v .
11. Set the Off time.
q Either turn the TUNING/PRESET knob !4 or press
the CHANNEL/CONTROL button ⁄4 to adjust the
hour for the Off time and press the
TUNING/PRESET knob !4 or ENTER button v .
w Either turn the TUNING/PRESET knob !4 or press
the CHANNEL/CONTROL button ⁄4 to adjust the
minutes for the Off time.
12. Set the timer program.
q Press the TUNING/PRESET knob !4 or ENTER
button v to decide the timer program setting.
Standby indicator lights up green and setting
contents are scrolled.
Note
• Timer program can activate regardless of power on or
standby mode.
• When timer program is finished, the unit goes to standby
mode.
• When timer program is activated, standby indicator lights
green.
• You can cancel the Timer program setting procedure at
any time by pressing the TIMER button ⁄7 .
7 Confirm and change timer program
• You can check and change the timer program setting as
follows.
1. Press the TIMER button ⁄7 .
2. Either turn the TUNING/PRESET knob !4 or press the
CHANNEL/CONTROL button ⁄4 to select timer program
number.
3. You can change the displayed contents with the
TUNING/PRESET knob !4 or CHANNEL/CONTROL ⁄4
and ENTER buttons v if necessary.
Note
• Timer program is not changed if you quit confirming
halfway through a procedure.
REMOTE CONTROLLER
RC7001ST
SHIFT
R E
EN T
BAND MENU
TUNING
CONTROL
CHANNEL/
A/B C/D E/F
TIMER
10
DISPLAY DIMMER
9 8 7
4 5 6
3 2
T-MODE I/J G/H
SLEEP MEMO
ON STANDBY
1
/A-TUNE
A-PRESET
⁄4
v
⁄7
PUSH ENTER PUSH ENTER
TUNING/PRESET TUNING/PRESET
STEREO STEREO RDS RDS TUNED TUNED SECONDARY SECONDARY
BAND SELECT BAND SELECT AUTO TUNE AUTO TUNE MENU MENU DISPLAY DISPLAY DIMMER DIMMER
STANDBY STANDBY
ON/STANDBY ON/STANDBY POWER POWER
DAB/FM/AM TUNER ST7001 DAB/FM/AM TUNER ST7001
!4
7 Timer program off
1. Press the TIMER button ⁄7 , “TIMER PROGRAM 1” is
displayed.
2. Either turn the TUNING/PRESET knob !4 or press the
CHANNEL/CONTROL button ⁄4 to select timer program
number.
3. Press the TUNING/PRESET knob !4 or ENTER button
v , “TIMER PROGRAM x SET” is displayed.
4. Either turn the TUNING/PRESET knob !4 or press the
CHANNEL/CONTROL button ⁄4 to select “TIMER
PROGRAM x OFF”.
5. Press the TUNING/PRESET knob !4 or ENTER button
v to turn off the timer program.
Note
• To turn a timer program back on again, repeat this
procedure and select “TIMER PROGRAM x ON”.
ST7001N 01 Eng 05.7.21 5:24 PM ページ26