Operation, 7 auto tuning (fm/am), 7 default value – Marantz ST7001N User Manual
Page 14
10
ENGLISH
7 Auto tuning (FM/AM)
1.
Press the
POWER ON/STANDBY
switch
q
or
ON
button
,
to turn on the power.
2.
Watching the display, press the
BAND
button
c
to
select the desired band (AM or FM).
3.
Press the
MENU
button
u
or
⁄2
to select menu.
4.
Press the
TUNING/PRESET
knob
!4
or
ENTER
button
v
to set search mode.
5.
Either turn the
TUNING/PRESET
knob
!4
or press the
CHANNEL/CONTROL
button
⁄4
to select “Auto”.
6.
Press the
TUNING/PRESET
knob
!4
or
ENTER
button
v
to set the auto tuning mode.
7.
Either turn the
TUNING/PRESET
knob
!4
or press the
TUNING
button
⁄1
.
• Automatic searching begins, then stops when a station
tuned in.
Note
• When in the auto tuning mode on the FM band, the
“STEREO” indicator lights on the panel when the stereo
broadcast is tuned in. At open frequencies, the noise is
muted and the “TUNED” and “STEREO” indicators tuned off.
• If the signal is weak, if may be difficult to tune into the
station in stereo. In such a case, press the
T-MODE
button
⁄5
on the remote control. FM stereo broadcasts are
received in monaural and the stereo indicator is not
illuminated. To return to stereo mode, press the
T-MODE
button
⁄5
on the remote control again.
• If tuning does not stop at the desired station. Use “Manual
tuning” operation.
LISTENING TO FM/AM
7 FM Auto preset memory
1.
Press the
POWER ON/STANDBY
switch
q
or
ON
button
,
to turn on the power.
2.
Watching the display, press the
BAND
button
c
to
select the FM band.
3.
Press the
A-PRESET/A-TUNE
button
b
.
4.
Press the
ENTER
button
v
.
• The unit automatically begins searching for FM
broadcast stations.
• When the first FM broadcast station is found, that
station is stored in the preset memory at channel A1.
• Subsequent stations are automatically stored in order at
preset channels A1 to A10, B1 to B10, C1 to C10, D1 to
D10, E1 to E10, F1 to F10, G1 to G10, H1 to H10, I1 to
I10 and J1 to J10 for a maximum of 100 stations.
• Channel A1 is tuned in after the auto preset memory
operation is completed.
Note
• If an FM station cannot be preset automatically due to
poor reception, use the “Manual tuning” operation to tune
in the station, then preset it using the manual “Preset
memory” operation.
• To interrupt this function, press the
POWER ON/STANDBY
switch
q
or
STANDBY
button
z
.
• Do not operate with the
AUTO TUNE
button
i
on the
front panel.
• Perform this operation from the remote control unit.
7 DEFAULT VALUE
OPERATION
Auto tuner presets
A1 ~ A10
87.5 / 89.1 / 98.1 / 108 / 90.1 / 90.1 / 90.1 /
90.1 / 90.1 / 90.1 MHz
B1 ~ B10
522 / 603 / 999 / 1404 / 1611 kHz,
90.1 / 90.1 / 90.1 / 90.1 / 90.1 MHz
C1 ~ C10
90.1 MHz
D1 ~ D10
90.1 MHz
E1 ~ E10
90.1 MHz
F1 ~ F10
90.1 MHz
G1 ~ G10
90.1 MHz
H1 ~ H10
90.1 MHz
I1 ~ I10
90.1 MHz
J1 ~ J10
90.1 MHz
ST7001N 01 Eng 05.7.21 5:24 PM ページ10