7 preset stations, 7 recalling preset stations, Operation – Marantz ST7001N User Manual
Page 23
19
ENGLISH
7 Tuning in DAB (Digital Audio
Broadcasting) broadcasts
1.
Press the
POWER ON/STANDBY
switch
q
or
ON
button
,
to turn on the power.
2.
Watching the display, press the
BAND
button
c
to
select the desired band (DAB).
3.
Watching the display, press the
AUTO TUNE i
or
A-
PRESET/A-TUNE
button
b
to start automatically
scanning.
•
Using the DAB for the first time
When you first switch on the unit and select DAB, the
Auto Tuning function scans the Band
III
and L-band
frequencies. After the scanning, the first scanned
component will be selected.
To listen to other stations, use one of the search
modes shown below.
Press the
AUTO TUNE
button
i
or
A-PRESET/A-
TUNE
button
b
and release it in less than 2 seconds
to perform a local scan (UK band
III
).
(UK stations are in the range 11B to 12D).
Press the button for over 2 seconds then release it to
perform the full scan operation (Full band
III
and L-
band: 5A to LW).
Once auto scanning is completed, the number of
broadcast stations is displayed, then the first station is
tuned in.
If “Station not available” is displayed, check the
antenna’s connection (
☞
page 8).
You may want to re-tune at a later date if you move
the ST7001 or if you want to receive a newly
introduced ensemble.
Press the
AUTO TUNE
button
i
or
A-PRESET/A-
TUNE
button
b
.
4.
Either turn the
TUNING/PRESET
knob
!4
or press the
CHANNEL/CONTROL
button
⁄4
to select the station.
• If the station you select is in stereo, the “STEREO”
indicator will light up.
•
About Secondary service
When receiving a Secondary service, “<< >>” are
indicated to the right of “Channel and Frequency”.
When either the
TUNING/PRESET
knob
!4
or
ENTER
button
v
is pressed, the Secondary service Component
is received and the Secondary indicator lights.
Press
TUNING/PRESET
knob
!4
or
ENTER
button
v
to go back to the Primary service again.
5.
Press the
TUNING/PRESET
knob
!4
or
ENTER
button
v
to listen to the selected station.
• After “Now tuning…” is displayed, the tuned in station
appears.
7 Preset stations
1.
Follow steps 1 to 4 under “Tuning in DAB (Digital Audio
Broadcasting) broadcasts” to tune in the station to be
preset.
2.
Perform steps 2 to 7 under “Preset Stations (FM/AM)”.
• Up to 100 “S. Component” can be preset (DAB alone).
7 Recalling preset stations
The same procedure as for FM/AM stations. (
☞
page 12)
1.
Perform steps 1 to 7 under “Preset stations (FM/AM)”
(
☞
page 12)
2.
Press the
TUNING/PRESET
knob
!4
or
ENTER
button
v
to listen to the selected station.
• After “Now tuning...” is displayed, the tuned in station
appears.
OPERATION
Tune in the first broadcast station.
REMOTE CONTROLLER
RC7001ST
SHIFT
R
E
EN
T
BAND
MENU
TUNING
CONTROL
CHANNEL/
A/B
C/D
E/F
TIMER
10
DISPLAY
DIMMER
9
8
7
4
5
6
3
2
T-MODE
I/J
G/H
SLEEP
MEMO
ON
STANDBY
1
/A-TUNE
A-PRESET
⁄4
v
c
b
,
PUSH ENTER
PUSH ENTER
TUNING/PRESET
TUNING/PRESET
STEREO
STEREO
RDS
RDS
TUNED
TUNED
SECONDARY
SECONDARY
BAND SELECT
BAND SELECT
AUTO TUNE
AUTO TUNE
MENU
MENU
DISPLAY
DISPLAY
DIMMER
DIMMER
STANDBY
STANDBY
ON/STANDBY
ON/STANDBY
POWER
POWER
DAB/FM/AM TUNER ST7001
DAB/FM/AM TUNER ST7001
!4
i
q
ST7001N 01 Eng 05.7.21 5:24 PM ページ19