7 tp search, 7 pty search, Operation – Marantz ST7001N User Manual
Page 18
14
ENGLISH
7 TP search
Use this function to find RDS stations broadcasting traffic
program (TP).
1.
Press the
MENU
button
u
or
⁄2
to select menu.
2.
Either turn the
TUNING/PRESET
knob
!4
or press the
CHANNEL/CONTROL
button
⁄4
to display “RDS”.
3.
Press the
TUNING/PRESET
knob
!4
or
ENTER
button
v
to set the RDS search selection mode.
4.
Either turn the
TUNING/PRESET
knob
!4
or press the
CHANNEL/CONTROL
button
⁄4
to display “TP Search”.
5.
Press the
TUNING/PRESET
knob
!4
or
ENTER
button
v
to set the TP search standby mode.
6.
Either turn the
TUNING/PRESET
knob
!4
or press the
CHANNEL/CONTROL
button
⁄4
. The RDS search
automatically begins and the RDS LED flashes.
• If no TP station is found with above operation, all the
reception bands are searched.
• The station name is displayed on the display after
searching stops.
7.
• If no other TP station is found when all the frequencies
are searched, “NO programme” is displayed.
7 PTY search
• Use this function to find RDS stations broadcasting a
designated program type (PTY).
• For a description of each program type, refer to “Program
Type (PTY)”.
1.
Press the
MENU
button
u
or
⁄2
to select menu.
2.
Either turn the
TUNING/PRESET
knob
!4
or press the
CHANNEL/CONTROL
button
⁄4
to display “RDS”.
3.
Press the
TUNING/PRESET
knob
!4
or
ENTER
button
v
to set the RDS search selection mode.
4.
Either turn the
TUNING/PRESET
knob
!4
or press the
CHANNEL/CONTROL
button
⁄4
to display “PTY
Search”.
5.
Press the
TUNING/PRESET
knob
!4
or
ENTER
button
v
to set the PTY search selection mode.
6.
Watching the display, either turn the
TUNING/ PRESET
knob
!4
or press
CHANNEL/CONTROL
button
⁄4
to call
out the desired program type.
• When receiving an RDS station, its program type is
displayed first.
• When not receiving an RDS station, “PTY” flashes.
7.
Press the
TUNING/PRESET
knob
!4
or
ENTER
button
v
to set the PTY search standby mode.
8.
Either turn the
TUNING/PRESET
knob
!4
or press the
CHANNEL/CONTROL
button
⁄4
. The RDS search
automatically begins and the RDS LED flashes.
• If there is no station broadcasting the designated
program type above operation, all the reception bands
are searched.
• The station name is displayed on the display after
searching stops.
9.
• If no other station broadcasting the designated
program type is found when all the frequencies are
searched, “NO programme” is displayed.
OPERATION
ST7001N 01 Eng 05.7.21 5:24 PM ページ14