Marantz ST7001N - Manual (Page 15)

11
ENGLISH
7 Manual tuning (FM/AM)
1. Press the POWER ON/STANDBY switch q or ON
button , to turn on the power.
2. Watching the display, press the BAND button c to
select the desired band (AM or FM).
3. Press the MENU button u or ⁄2 to select menu.
4. Press the TUNING/PRESET knob !4 or ENTER button
v to set search mode.
5. Either turn the TUNING/PRESET knob !4 or press the
CHANNEL/CONTROL button ⁄4 to select “Manual”.
6. Press the TUNING/PRESET knob !4 or ENTER button
v to set the manual tuning mode.
7. Either turn the TUNING/PRESET knob !4 or press the
TUNING button ⁄1 to tune in the desired station.
• The frequency changes continuously when the
TUNING button ⁄1 on the remote control unit is held in.
7 Preset stations (FM/AM)
1. Use the “Auto tuning” or “Manual tuning” operation to
tune in the station to be preset in the memory.
2. Press the MENU button u or ⁄2 to select menu.
3. Either turn the TUNING/PRESET knob !4 or press the
CHANNEL/CONTROL button ⁄4 to select “Memory”.
4. Press the TUNING/PRESET knob !4 , or ENTER button
v to set the preset mode and make the preset channel
number flash.
• Steps 1 to 4 can be skipped when using the MEMO
⁄6 button.
When this button is pressed, the preset memory
standby mode is set, regardless of the menu setting at
that time.
5. While the preset channel number is flashing, either press
the
SHIFT button ⁄3 to select the desired memory group
(A to J) or press a MEMORY GROUP (A to J) button n .
6. While the preset channel number is flashing, either turn
the
TUNING/PRESET knob !4 , press the
CHANNEL/CONTROL ⁄4 or Preset channel button x
to select the desired preset channel (1 to 10).
OPERATION
REMOTE CONTROLLER
RC7001ST
SHIFT
R E EN T
BAND MENU
TUNING
CONTROL
CHANNEL/
A/B C/D E/F
TIMER
10
DISPLAY DIMMER
9 8 7
4 5 6
3 2
T-MODE I/J G/H
SLEEP MEMO
ON STANDBY
1
/A-TUNE A-PRESET
c
b
v
z
⁄2
⁄3
⁄4
⁄5
⁄6
⁄1
n
x
,
PUSH ENTER PUSH ENTER
TUNING/PRESET TUNING/PRESET
STEREO STEREO RDS RDS TUNED TUNED SECONDARY SECONDARY
BAND SELECT BAND SELECT AUTO TUNE AUTO TUNE MENU MENU DISPLAY DISPLAY DIMMER DIMMER
STANDBY STANDBY
ON/STANDBY ON/STANDBY POWER POWER
DAB/FM/AM TUNER ST7001 DAB/FM/AM TUNER ST7001
q u !4 i
7. While the preset channel number is flashing, either press
the
TUNING/PRESET knob !4 or MEMO button ⁄6 to
store the station in the preset memory.
• To preset other channels, repeat steps 2 to 6.
• A total of 100 broadcast stations can be preset — 10
stations (channels 1 to 10) in each of groups A to J.
ST7001N 01 Eng 05.7.21 5:24 PM ページ11