Marantz SR7008 - Manual (Page 253)

253
Tips Settings Playback Connections Contents
Front panel Display Rear panel Index Remote
Appendix
z1 This item can be selected when a Dolby TrueHD signal is played.
z2 This item can be selected when a Dolby Digital or DTS signal is played.
z3 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
z4 This setting is available when the set sound mode name contains “+PLgz”.
z5 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode.
z6 This setting is available when “Subwoofer Mode” (vpage 198) in the menu is set to “LFE+Main”.
z7 This setting is available when the set sound mode name contains “+Neo:X”.
z8 This item cannot be set when “Dynamic EQ” (vpage 168) is set to “On”.
z9 This item cannot be set when Audyssey® Setup (Speaker Calibration) has not been performed.
z10 This item cannot be set when “MultEQ® XT32” (vpage 167) is set to “Off” or “Graphic EQ”.
z11 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.