Marantz SR7008 - Manual (Page 24)

24
Appendix Tips Settings Playback Connections Contents
Front panel Display Rear panel Index Remote
Remote control unit
q Display
q LEARN indicator
This is lit when setting the learning function for the remote control
unit (vpage 220).
w Information display
• This displays “AVR” when operating this unit.
• This displays the input source name when operating an external
device.
• This displays “TV” when operating TV.
e indicator
This is lit when signals are sent from the remote control unit.
w AVR-operation mode button
When preset codes are registered to the remote control unit, press this
button and then operate the menu on the unit.
e SET button
This is used for various settings on the remote control unit
(vpage 212, 220, 223, 224).
r ZONE SELECT button
These switch the zone (MAIN ZONE, ZONE2, ZONE3) that is operated
through the remote control unit (vpage 149, 158).
t Device operation buttons (DEVICE X / DEVICE MENU)
These turn the power of external devices on/off and call up menus.
Preset codes need to be registered in order to use these buttons
(vpage 216).
y Input source select buttons
These select the input source (vpage 60, 149).
q
w
e
r
t
y
q w e