Sets where to display the master volume level.
Bottom (Default) : Display at the bottom.
Top : Display at the top.
Off : Turn display off.

• When the master volume display is hard to see when superimposed text

(closed captioning) or movie subtitles are present, set to “Top”.

2 Info

Displays status of operation temporarily when the sound mode is

changed, or input source is switched.
On (Default) : Turn display on.
Off : Turn display off.

2 Now Playing

Sets the display time for the playback display when the input source is

“NETWORK”, “iPod/USB” or “HD Radio”.
Always On (Default) : Show display continuously.
Auto Off : Show display for 30 seconds after operation.

TV Format

Set the video signal format to be output for the TV you are using.

2 Format

NTSC (Default) : Select NTSC output.
PAL : Select PAL output.

• “Format” can also be set by the following procedure. However, the menu

screen is not displayed.

1. Press and hold the main unit’s STATUS and ZONE SELECT for at least 3

seconds.
“zVideo Format ” appears on the display.

2. Use the main unit’s

o p

and set the video signal format.

3. Press the main unit’s ENTER to complete the setting.

NOTE

• When a format other than the video format of the connected TV is set, the

picture will not be displayed properly.