Marantz SR7008 - Manual (Page 20)

20
Appendix Tips Settings Playback Connections Contents
Front panel Display Rear panel Index Remote
Q0 o i u t r y Q1 Q2
r Master volume indicator
t MUTE indicator
This blinks while the sound is muted (vpage 61, 150).
y Sleep timer indicator
This lights when the sleep mode is selected (vpage 135).
u MULTI ZONE indicator
This lights up when ZONE2 or ZONE3 (separate room) power is turned
on (vpage 149).
i Monitor output indicator
These light according to the HDMI monitor output setting.
When set to “Auto(Dual)”, the indicators light according to connection
status (vpage 174).
o Tuner reception mode indicators
These light according to the reception conditions when the input
source is set to “HD Radio”.
STEREO : In FM mode, this lights up when receiving stereo broadcasts.
TUNED : Lights up when the broadcast is properly tuned in.
Q0 Audyssey® indicator
This indicator lights when the “MultEQ® XT32” (vpage 167),
“Dynamic EQ” (vpage 168) or “Dynamic Volume” (vpage 169)
setting is set to other than “Off” and “Audyssey LFC™” (vpage 169)
setting or “Audyssey DSX®” (vpage 170) is set to other than “Off”.
Q1 Decoder indicator
These light when Dolby or DTS signals are input or when the Dolby or
DTS decoder is running.
Q2 Input signal indicators
The respective indicator will light corresponding to the input signal
(vpage 182).