Marantz SR6005 - Manual (Page 82)

78
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
Display
y u Q1 Q3 Q4 Q5 i o Q0 Q2
w q e r t
q Input signal indicators
w Input signal channel indicators
These light when digital signals are input.
When playing HD Audio sources, the
indicator lights when a
signal from an extension channel (a channel other than the front,
center, surround, surround back or LFE channel) is input.
If there are two or more extension channels, the
and
indicators light.
e Information display
The input source name, surround mode, setting values and other
information are displayed here.
r Front height channel indicators
When audio is output from the front height channels, the “H”
indicator lights.
t Front speaker indicator
This lights according to the setting of the front A and B speakers.
y Master volume indicator
u MUTE indicator
This lights when the mute mode is select (vpage 24).
i AUDYSSEY indicators
Lighting is as follows, depending on the setting of “Dynamic EQ®”
(vpage 58) and “Dynamic Volume®” (vpage 58).
When “Dynamic EQ” and “Dynamic Volume” are
“ON”.
When “Dynamic EQ” is “ON” and “Dynamic
Volume” is “OFF”.
When “Dynamic EQ” and “Dynamic Volume” are
“OFF”.
o Sleep timer indicator
This lights when the sleep mode is selected (vpage 43).
Q0 ZONE2 indicator
This lights up when ZONE2 (separate room) power is turned on
(vpage 46).
Q1 Input mode indicators
Set the audio input modes for the different input sources (vpage 55).
Q2 HDMI indicator
This lights when playing using HDMI connections.
Q3 Tuner reception mode indicators
These light according to the reception conditions when the input
source is set to “HD Radio”.
STEREO : In the FM mode, this light when receiving stereo
broadcasts.
TUNED : Lights when the broadcast is properly tuned in.
AUTO : This light when in the auto tuning mode.
Q4 Decoder indicators
These light when the respective decoders are operating.
Q5 HD indicator
This light during HD Radio reception.