Marantz SR6005 - Manual (Page 50)

46
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
Playback
1
Press Z2 to switch the remote
control operating mode.
The remote control unit switches to the
operating mode for ZONE2.
2
Press ON to turn on the ZONE2
power.
The indicator on the display lights.
• When STANDBY is pressed, ZONE2 turns
off.
• Power in ZONE2 can be turned on or off by
pressing ZONE2 ON/OFF on the main unit.
3
Press INPUT df .
The audio signal of the selected source
is output to ZONE2.
• Turn INPUT SELECTOR after
pressing ZONE SELECT on the
main unit to select an input
source.
When power for both MAIN ZONE and ZONE2 is set to ON, power of
the MAIN ZONE only can be turned off. Press
STANDBY .
Adjusting the volume
Use VOLUME + – to adjust the volume.
G Adjustable rangeH – – – –80dB – –40dB – 18dB
(When the “Volume Display” (vpage 66) setting is “Relative”)
G
Adjustable rangeH 0 – 41 – 99
(When the “Volume Display” (vpage 66) setting is “Absolute”)
• At time of purchase, “Volume Limit” (vpage 65) is set to “–10dB
(71)”.
Turn MASTER VOLUME after pressing ZONE SELECT on the main unit
to adjust the sound volume.
Turning off the sound temporarily
Press MUTE .
The sound is reduced to the level set at “Mute Level” (vpage 65) in
the menu.
• To cancel, either adjust the volume or press
MUTE again.
• The setting is canceled when the zone’s power is turned off.