Marantz SR6005 - Manual (Page 78)

74
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
Operating macro function
• When the macro function is used, operations that usually require a
complicated series of multiple button operations can be performed
easily just by pressing the
MACRO button.
• This device can remember up to 6 macro functions.
• Each macro can record a maximum of 10 steps.
[Example] To playback a DVD
q Turn this unit’s power on
↓
w Switch this unit's input source to DVD
↓
e Turn the TV’s power on
↓
r DVD Playback
Recording macro operations
[Example] Recording DVD playback operations to the number “1”
button
1
Press and hold SET and MACRO
together until “MACRO”
flashes in the LEARN indicator,
MACRO indicator and remote
control display.
2 Press the macro operation
number (“ 1 ”) that you want to
record to.
“M1-01” is shown in the remote control
display.
• If the number that you want to record to
has already been recorded to, the recorded
number flashes in the display.
3 Press the input source switch
button (“ DVD ”) of the operation
that you want to record along
with the command button (“ 1 ”).
The macro operation step number is
shown in the remote control display.
• To record the amp input source, press AMP first, followed by the
input source switching button.
4 When the macro operation recording is complete,
press and hold ENTER until the LEARN indicator
and MACRO indicator switch off.
NOTE
The RETURN , uio p, ENTER , VOLUME + , – and CLR buttons cannot
be recorded as macro operations.
Checking recorded macro operations
[Example] Checking the recorded macro operations to button “ 1 ”
1
Press and hold MACRO and
MENU together until “MACRO”
flashes in the LEARN indicator,
MACRO indicator and remote
control display.
2
Press the number button (“ 1 ”)
that you want to check.
The LEARN indicator, MACRO indicator
and “M1-01” flashes in the remote
control display.
3
Press the VOLUME +, – .
• The LEARN indicator switches off,
and “M1-01” is shown in the remote
control display.
• The recorded macro operation is
performed.
4 Repeat step 3 until the final number of the macro
operation is displayed.
• The display returns to that of step 1.
• When the macro operation number is displayed, the
corresponding macro operation is performed.
5 When the macro operation check is complete, press
and hold ENTER until the MACRO indicator switches
off.
Editing recorded macro operations
[Example] Changing macro operation “ 1 ” recorded on number button
“ 1 ” to “ 3 ”, and changing the number button to“ 2 ”
1
Press and hold MACRO and
MENU together until “MACRO”
flashes in the LEARN indicator,
MACRO indicator and remote
control display.
2
Press the number button (“ 1 ”)
that you want to change.
The LEARN indicator, MACRO indicator
and “M1-01” flashes in the remote
control display.
3
Press ui to select the macro
operation button (“ 2 ”) to edit.
After the macro operation button is
displayed, the recorded operation is
performed.
• When the macro operation is updated as a recorded step, press
the input source switching button, and then press the new step
button (“
2 ”).
• To insert a new macro operation between recorded steps, after
performing step 3, press MEMORY and then press the new step
button (“ 2 ”).
When a new step is introduced, if the total number of steps is
already 10, the 10th step is deleted after the new step is introduced.
• To delete recorded macro operations, after step 3, call the step
number that you want to delete, and press CLR .
• To return to step 1, press ENTER .
4 When the macro operation edit is complete, press and
hold ENTER until the MACRO indicator switches off.