beautypg.com

N settings related to hdmi connections, Input assign ( v page 52), Hdmi setup ( v page 64) – Marantz SR6005 User Manual

Page 20: Cables used for connections

background image

16

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

SVENSKA

Connecting to a device equipped with a DVI-D connector

When an HDMI/DVI conversion cable (sold separately) is used, the HDMI video signals are converted to
DVI signals, allowing connection to a device equipped with a DVI-D connector.

NOTE

• No sound is output when connected to a device equipped with a DVI-D connector. Make separate audio

connections.

• Signals cannot be output to DVI-D devices that do not support HDCP.
• Depending on the combination of devices, the video signals may not be output.

n

Settings related to HDMI connections

Set as necessary. For details, see the respective reference pages.

Input Assign (vpage 52)

Set this to change the HDMI input connector to which the input source is assigned.

HDMI Setup (vpage 64)

Make settings for HDMI video/audio output.

• RGB Range

• Auto Lip Sync

• HDMI Audio Out

• HDMI Control

• Standby Source

• Power Off Control

NOTE

The audio signals output from the HDMI connectors are only the HDMI input signals.

Connecting an HDMI-compatible device

Cables used for connections

Audio and video cable (sold separately)

HDMI cable

• This interface allows transfer of digital video signals and digital audio signals over a single HDMI cable.

OUT

HDMI

OUT

HDMI

OUT

HDMI

OUT

HDMI

OUT

HDMI

OUT

HDMI

IN

HDMI

Blu-ray

Disc

player

DVD

player

TV

Set-top

box

Video

cassette
recorder

Game

console

Digital

camcorder

• When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an

HDMI cable.

• When connecting a device that supports Deep Color transmission, please use a “High Speed HDMI

cable” or “High Speed HDMI cable with Ethernet”.

• Video signals are not output if the input video signals do not match the monitor’s resolution. In this case,

switch the Blu-ray Disc/DVD player’s resolution to a resolution with which the monitor is compatible.

• When this unit and monitor are connected with an HDMI cable, if the monitor is not compatible with

HDMI audio signal playback, only the video signals are output to the monitor.

NOTE

The audio signal from the HDMI output connector (sampling frequency, number of channels, etc.) may be
limited by the HDMI audio specifications of the connected device regarding permissible inputs.