Marantz SR6005 - Manual (Page 69)

65
Basic version
Simple version
Information
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
Advanced version
Manual Setup
Remote control operation
buttons
Move the cursor
(Up/Down/Left/Right)
Confirm the setting Return to previous menu
ZONE2 Setup
Default settings are underlined.
Set the audio to play back with ZONE2.
Setting items Setting details
Bass
Adjust low frequency range
(bass). –10dB – +10dB (0dB)
Treble
Adjust high frequency range
(treble). –10dB – +10dB (0dB)
HPF
Make settings for cutting
the low range to reduce
distortion in the bass. ON : The low range is attenuated.
OFF : The low range is not attenuated.
Level Lch
Adjust the left channel
output level. –12dB – +12dB (0dB)
The “Level Lch” can be set when “Channel“ (vpage 65) is set to
“Stereo“.
Level Rch
Adjust the right channel
output level. –12dB – +12dB (0dB)
The “Level Rch” can be set when “Channel“ (vpage 65) is set to
“Stereo“.
Channel
Set the signal output from
multi-zone. Stereo : Select stereo output.
Mono : Select mono output.
Volume Level
Set the volume output level. Variable : Volume adjustment is enabled by main unit and remote control
unit.
–40dB (41) : Fix volume at –40 dB. Set when adjusting volume by external
amplifier.
0dB (81) : Fix volume at 0 dB. Set when adjusting volume by external
amplifier.
When “Amp Assign” (vpage 61) is set to “ZONE2”, the “Volume
Level” setting is automatically set to “Variable”.
Volume Limit
Make a setting for
maximum volume. OFF : Do not set a maximum volume.
–20dB (61) / –10dB (71) / 0dB (81)
• This can be set when the multi-zone “Volume Level” setting (vpage 65)
is “Variable”.
• This is displayed from 0 to 99 when “Volume Display” (vpage 66) is set
to “Absolute”.
Setting items Setting details
Power On Level
Define the volume setting
that is active when the
power is turned on. Last : Use the memorized setting from the last session.
– – – (0) : Always mute when power is turned on.
–80dB – 18dB (1 – 99) : The volume is adjusted to the set level.
• This can be set when the multi-zone “Volume Level” setting (vpage 65)
is “Variable”.
• This is displayed from 0 to 99 when “Volume Display” (vpage 66) is set
to “Absolute”.
Mute Level
Set the amount of
attenuation when muting
is on. Full : The sound is muted entirely.
–40dB : The sound is attenuated by 40 dB down.
–20dB : The sound is attenuated by 20 dB down.