Install, When 5.1ch installed, When 2.1ch installed – Marantz SR6005 User Manual
Page 39: Procedure for speaker settings, When 7.1ch (front height speaker) installed, When 6.1ch (surround back speaker) installed

35
Basic version
Simple version
Information
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
Advanced version
When 5.1ch installed
FL
FR
SW
C
SL
SR
z
1
z
2
Listening
position
z
1 22˚ – 30˚
z
2 120˚
When 2.1ch installed
FR
SW
FL
Listening position
FL Front speaker (L)
SB Surround back speaker
FR Front speaker (R)
FHL Front height speaker (L)
C
Center speaker
FHR Front height speaker (R)
SW Subwoofer
SL Surround speaker (L)
SR Surround speaker (R)
Procedure for speaker settings
Install
Connect (vpage 36)
Set up speakers (vpage 39)
Install
This unit is compatible with Dolby Pro Logic gz (vpage 88),
which offers an even wider and deeper surround sensation.
When using Dolby Pro Logic gz, install front height speakers.
Install the surround back speakers in a position 2 to 3 ft (60 to 90 cm)
higher than ear level.
z
Surround
speaker
2 – 3 ft /
60 – 90 cm
G
Viewed from the sideH
Front height
speaker
• Point slightly
downwards
At least
3.3 ft / 1 m
Surround back
speaker
• Point slightly
downwards
Front
speaker
z
Recommended for Dolby Pro Logic gz
NOTE
It is not possible to use the surround back speakers and front height
speakers simultaneously.
When 7.1ch (Front height speaker) installed
FL
FR
FHR
FHL
C
SL
SR
SW
z
1
z
2
z
3
Listening position
z
1 22˚ – 30˚
z
2 22˚ – 45˚
z
3 90˚ – 110˚
When 6.1ch (Surround back speaker) installed
FL
FR
C
SB
SL
SR
SW
z
1
z
2
Listening position
z
1 22˚ – 30˚
z
2 90˚ – 110˚
Speaker installation/connection (Other than 7.1-channel system with surround back speakers)
This section explains a wide range of speaker installation/connection/setting procedures.
For details on installing/connecting/setting 7.1 channel audio that uses surround back speakers, see “Simple version (Simple setup guide)” (vpage 4)
.
Use the Audyssey® Auto Setup function of this unit to automatically detect the number of connected speakers and perform optimal settings for the speakers to
be used.