Marantz NR1604 - Manual (Page 32)

29
Playback (Basic operation)
Setup ( vpage 22 )
n Turning the power on ( vpage 29 )
n Selecting the input source ( vpage 29 )
n Adjusting the master volume ( vpage 30 )
n Turning off the sound temporarily ( vpage 30 )
n Playing a Blu-ray Disc player/DVD player
( vpage 30 )
n Playing a CD player ( vpage 30 )
n Playing an iPod ( vpage 31 )
n Playing a USB memory device ( vpage 34 )
n Listening to FM/AM broadcasts ( vpage 37 )
n Listening to Internet Radio ( vpage 46 )
n Playing back files stored on a PC and NAS
( vpage 49 )
n Using online services ( vpage 53 )
n Convenient functions ( vpage 64 )
n AirPlay function ( vpage 70 )
Selecting a listening mode (Sound Mode)
( vpage 72 )
Playback (Advanced operation) ( vpage 95 )
Important information
Before starting playback, make the connections between the different
devices and the settings on the unit.
NOTE
Also refer to the operating instructions of the connected devices
when playing them.
Turning the power on
Press POWER X to turn on power to
the unit.
You can also switch the power to standby by pressing X on the main
unit.
n When power is switched to standby
Press POWER X .
GPower indicator status in standby modeH
Normal standby : Red
• When “HDMI Pass Through” or “HDMI Control” ( vpage 116 )
is set to “On” : Orange
• When “IP Control” ( vpage 128 ) is set to “Always On” :
Orange
Selecting the input source
Press the input source select button
( CBL/SAT , DVD , Blu-ray , GAME ,
AUX1 , MEDIA PLAYER , TV AUDIO ,
AUX2 , TUNER , iPod/USB , M-XPort ,
CD , NETWORK or INTERNET RADIO )
to be played back.
The desired input source can be selected
directly.
You can also use the following operation to select an input
source.
n Select the input source using the main unit
Turn INPUT SELECTOR .
• Turning INPUT SELECTOR switches the input source, as shown
below.
GAME AUX1 AUX2
MEDIA
PLAYER
iPod/USB TUNER NETWORK CD TV AUDIO
M-XPort
Blu-ray DVD CBL/SAT
Basic instructions
Advanced instructions
Information
Basic instructions
DVD