MacroSystem Slivers - Manual (Page 8)

8
Click on the Type button. This opens a selection window in
which you should select the “Triangle A (3)” part type by click-
ing on it.
You should then close the Type window by clicking on OK.
You should now activate the middle part by clicking on the
middle window in the part preview. The color of the middle
preview window now changes from dark gray to light gray. You
can also select the window by sliding the Part slider to 2 and
confirming with a click.
You should then click on Scene to open the scene bin and
select the scene you want to insert in the middle part.
Confirm the selection with OK. The selected scene will now
be displayed in the middle part. It will be centered. To indicate
that a scene has now been inserted, a small white rectangle
will be displayed in the part preview window.
If the rectangle is incomplete, the scene you inserted has a
shorter duration than the background scene. This means that
during the rendering process, when the scene is finished, it will
be replaced by frames from the background scene.
You may now change the size of the scene you just inserted
by clicking on the Scale slider in the Edit menu. By moving the
slider you can size the scene as desired. Confirm the size you
selected with a click. For the test, please select 150%.