beautypg.com

MacroSystem Bogart SE Ver.4 - 4.1g Release Notes User Manual

Page 4

background image




INSTALLATION INSTRUCTIONS

1. When the system is booted on, simply eject the DVD tray and put in the Bogart Operating System
CD.

2. Shut the machine down normally with the Off button or a Force Shut Down (if needed).

3. Wait a few seconds, and then reboot the machine. The system will start up and after a minute or so
start accessing the burner and reading the disc. A prompt will then come on the screen to indicate the
system is being analyzed. Wait until the next install screen comes up.

4. The next screen will give you the options to do what is called the update or the installation. The
update is just going to reset or add corrections to the software section and leaves the video and audio
elements current. The update process will be fairly short maybe around a couple of minutes or so. If
you choose the Installation button, a second message will appear to warn you that all files will be
cleared. (If you plan to do a new full installation, be sure you have backed your projects up to tape or to
an external drive. This will clear off all data on the drive. We recommend doing a full install of software
from time to time if you are able.) Go ahead and accept this choice and the system will re-install. An
install process will take about 10 minutes.

5. When process is done, the tray will pop out and you can remove the CD. Click on the return key on
the keyboard to close the tray door. The system will shut down.

6. Now you can reboot and get to the main menu. If you did the full install, then you will need to enter
the code for Bogart SE in the Install Product menu before you can continue on and re-activate other
codes or start reloading footage.

* After a new installation, the Media Manager side will display a list of some new products in the

Install Product menu. The Premium Package would be the only add on program you need to
activate. Many of the other programs in Media Manager are simply not available yet or for only
the European "Enterprise" DVR systems.

If you choose do an update, be aware that the main Settings menu will not immediately
reflect this change after the update process. It will still list the prior Bogart version. To
complete the Bogart 4 update process, go to the main Settings menu and select "Install
Product". Then simply "Activate" the Bogart 4.1 version that is in the list with your
Bogart 4 license code. The system will reboot and you now have Bogart 4.1g listed in the
main Settings menu.

This manual is related to the following products: