Lynx Studio LS-ADAT - Manual (Page 5)

LS-ADAT
Page 4
Installation Procedure
The following installation procedure must be followed in the order described below in insure proper
operation.
LynxTWO/L22 Driver
Verify that the driver installed for your LynxTWO/L22 is Build 049 or later. You can determine the
driver version by selecting About Mixer in the Mixer menu of the LynxTWO/L22 Mixer. If you do
not have the correct driver version it can be downloaded from the Lynx web site at
http://www.lynxstudio.com/download.html. Refer to the Installation section of the LynxTWO or L22
User’s Guide for more information related to driver installation.
LynxTWO/L22 Firmware
Verify that the version of firmware installed on your LynxTWO/L22 will support the LS-ADAT. You
can determine the firmware version by selecting About Mixer in the Mixer menu of the
LynxTWO/L22 Mixer. Verify the firmware version for your product is:
LynxTWO A Model: Rev 22 or later
LynxTWO B Model: Rev 8 or later
LynxTWO C Model: Rev 6 or later
L22: Rev 8 or later
If you do not have the correct firmware version installed, download the latest LynxTWO/L22
Firmware Update program http://www.lynxstudio.com/download.html. This is a self-extracting
archive file.
1. Start L2UpdateXX.exe.
2. When prompted, navigate to a temporary directory to store L2Update.
3. L2Update will automatically start.
4. Click the Update button to continue.
5. Click OK when prompted and wait for the update process to complete.
6. Power down your computer. A warm boot will not load the new firmware.