Lynx Studio LS-ADAT - Manual (Page 3)

LS-ADAT
Page 2
Introduction
Thank you for purchasing the LS-ADAT™! We are proud to provide you with a reliable,
professional-quality product for your digital audio requirements.
This manual provides basic information to help you get started. Additional information is available
via our web site and email support. Please refer to the support section at the end of this manual for
support contact information.
The LS-ADAT is a 16-channel ADAT LStream
™ interface that is designed for use with the
LynxTWO and L22 professional audio interfaces. The devices communicate via Lynx’s proprietary
LStream multi-channel interface.
Before You Begin
We recommend that you read through the manual to acquire an overview of the installation procedure
and use of the LS-ADAT. You should have a working knowledge of Windows and general PC
concepts. Additionally, refer to the User’s Guide included with your LynxTWO or L22.
Contents
Verify that you received the following in the LS-ADAT shipping carton:
• LS-ADAT card in cushioned antistatic bag
• LS-ADAT LStream cable (gray ribbon cable with two IDC connectors)
• Warranty Registration Card
Optional Equipment
The following cables are required for connection to external devices:
• TOSLINK optical cable (4), available from Lynx: Part # CBL-OPT3M - 3 meter length
• ADAT 9-pin Sync Cable, standard cable readily available
System Requirements
Verify that your computer meets or exceeds the following the system requirements specified in the
LynxTWO or L22 User’s Guide.
The LS-ADAT requires one expansion card position in your computer. A PCI slot is not required.
The LS-ADAT derives all signals from the host LynxTWO/L22 card via its LStream ribbon cable.