LSC Lighting NEXUS - Manual (Page 8)

Functions & Features NEXUS
Operator Manual V1.01
Page 2 © 2011 LSC Lighting Systems (Aust) Pty. Ltd.
 Remote programming and monitoring via LSC’s NexLan software.
 DMX input options such as:
o Normal
o Backup.
 DMX output options such as:
o Normal.
o Merging of any 2 ArtNet or sACN universes in HTP / LTP or custom.
o Priority merging (back up mode).
o Merging with softpatch.
o DMX control of merging.
o Each output can merge 2 DMX universes. It is also possible to “resend” a merged
output as a new ArtNet or sACN universe on the network and use this universe to
merge with a third universe.
 Can be configured as a DMX splitter.
 Remote takeover of fixture parameters allowing it to be used as standalone DMX
toolbox.
 Visualizer input supports programs such as WYSIWYG / ESP / Capture / and many
others.
 Available in either rack mount or truss mount housings.
1.4 NEXLAN SOFTWARE
The NexLan software is used to configure and monitor the Nexus range of products.
The software is only necessary when you configure the Nexus products however you may
also use it to monitor the system and to control and test lighting fixtures without the
presence of a lighting console.
The software is a free download and is available on these platforms:
 Windows (XP and Vista).
 Apple Mac OS X (10.4 and up as universal binary).
The NexLan software is fully described in its own section of this manual.