LSC Lighting NEXUS - Manual (Page 40)

Fixture Library NEXUS
Operator Manual V1.01
Page 34 © 2011 LSC Lighting Systems (Aust) Pty. Ltd.
parameter = Gobo 1 Mode
parameter = Gobo 1
parameter = Gobo 1 <>
parameter = Prism
parameter = Prism <>
parameter = Focus
parameter = Iris
parameter = Shutter
highlight = 255
default = 255
parameter = Intensity
highlight = 255
parameter = Speed 1
parameter = Macro
parameter = Control
macro = Reset
step = set, Shutter, 0
step = set, Control, 64
step = delay, 2
step = release, all
macro = Lamp On
step = set, Shutter, 0
step = set, Control, 84
step = delay, 2
step = release, all
macro = Lamp Off
step = set, Shutter, 0
step = set, Control, 94
step = delay, 2
step = release, all
macro = Display Off
step = set, Shutter, 0
step = set, Control, 24
step = delay, 2
step = release, all
macro = Display Dim
step = set, Shutter, 0
step = set, Control, 34
step = delay, 2
step = release, all
macro = Display On
step = set, Shutter, 0
step = set, Control, 44
step = delay, 2
step = release, all
macro = Shutdown
step = set, Shutter, 0
step = set, Control, 124
step = delay, 4
step = release, all
Parameters are added in the DMX channel order. “fine” represents the fine channel of the
parameter. Add break if the fixture has more then one DMX range, for example a VL5 has a
separate dimmer.
parameter = name [, fine] [, break]
A default can be added (if the value is not 0), this value is used when disabling the fixture.