Leprecon LP-X24 Manual v3.2 Addendum - Manual (Page 33)

32 Chapter Two Setup Essentials
LP-X24 and LP-X48 Users Manual—Addendum
The LP-X48 drives two DMX lines with 512 channels each. By default, the first 200 DMX
channels on Line A are reserved for conventional lights
a setting that can be changed
if desired.
To Add a Moving Light Instrument into the System
This procedure will determine the DMX assignments for moving lights and allow you to
give names to the instruments for easier reference during programming.
1. From the Setup Mode screen, press the Inst softkey.
The Instrument List screen appears.
Add
Instrument List
1 Empty
2 Empty
3 Empty
Resrve
4 Empty
5 Empty
6 Empty
2. Press the Add softkey.
Use the side wheel to scroll to an empty slot if the Add softkey is not visible.
The instrument list appears. This list displays all instruments that are included in the
LP-X library. The left column displays manufacturers. The right column displays
instruments.
Add
All
Abstract
American DJ
Clay Paky
Coemar
FAL
1220 CMYR
1220 RPR
1220 XR
218
218 MkII
518
3. Use the left wheel to select a manufacturer.
4. Use the right or side wheel to select an instrument.
5. Press the Add softkey.