Leprecon LP-X24 Manual v3.2 Addendum - Manual (Page 24)

Quick Start Chapter One 23
LP-X24 and LP-X48 Users Manual
The ML Programmer Screen
The ML Programmer screen includes a group of buttons, six across and eight down.
These buttons correspond to the Instrument Select buttons.
On the LP-X24:
Row Corresponding Instrument Select Buttons
1 Bank 1—Instrument Select buttons 1-6
2 Bank 1—Instrument Select buttons 7-12
3 Bank 2—Instrument Select buttons 1-6
4 Bank 2—Instrument Select buttons 7-12
5-8 Twenty-four “virtual” Instrument Selects. That is to say
that there are twenty-four additional Instrument Selects
accessible only through the software
On the LP-X48:
Row Corresponding Instrument Select Buttons
1 Bank 1—Instrument Select buttons 1-6
2 Bank 1—Instrument Select buttons 7-12
3 Bank 1—Instrument Select buttons 13-18
4 Bank 1—Instrument Select buttons 19-24
5 Bank 2—Instrument Select buttons 1-6
6 Bank 2—Instrument Select buttons 7-12
7 Bank 2—Instrument Select buttons 13-18
8 Bank 2—Instrument Select buttons 19-24
Use the color of the buttons to determine the status of the instrument:
• Blue button with light blue text—in the cue but not in record mode. This corresponds
with a glowing yellow light on the Instrument Select.
• Yellow button with blue text—in the cue and in record mode. This corresponds with a
flashing yellow light on the Instrument Select.
• White button with light blue text—in the show but not assigned to the cue. This
corresponds with an unlit Instrument Select.