Leprecon LP-X24 Manual v3.2 Addendum - Manual (Page 29)

28 Chapter One Quick Start
LP-X24 and LP-X48 Users Manual—Addendum
The Run mode button flashes when you are in live override mode.
(2) Click or press the lights you want to override.
(3) Adjust the properties of the fixture or fixtures that you want to override.
If you make adjustments with the Programmer Fader at 10% or higher, the changes
you make will be visible immediately. Otherwise, you must raise the Programmer
Fader to the desired level when you have adjust the fixtures as desired.
(4) When your have completed all overrides and want to step out of Live Override mode,
click or press the Run button and then the Cancel Live Override menu item.
Live Override will also be cancelled if you leave Run mode.
Console and Keyboard Buttons
Console Buttons that are Disabled in Video Mode:
• Only softkey 1 (Switch to LCD Mode) is enabled in Video Mode. All other softkeys
are disabled.
• The Fixture button does not work in Video Mode. It has a point-and-click
replacement in video mode.
Items that are Still Controlled Only from the Console:
Some functions are still controlled only from the console. They do not have a Video
Mode counterpart.
• Bump and Filter buttons
• Playback and Stack Select buttons