Leprecon LP-X24 Manual v3.2 Addendum - Manual (Page 32)

LP-X24 and LP-X48 Users Manual—Addendum
Chapter Two:
Setup Essentials
Setup Mode provides the following features and functionality. This mode is always
accessible by pressing the Setup button in the Mode Controller section of the console.
Menu Function
Instr Use to add moving light instruments into a show.
Device Use to create a new device one not already included in
the LP-X's fixture library.
Patch Assign dimmers to board channels.
Groups Create groups of instruments for easy editing.
Default Use to set timing and show defaults.
CtrlF Execute control features such as turning lamps on and
off.
Show Use to create a new show and perform all show
maintenance such as backup and restore.
Update Use to load program and library updates.
Erase Use to erase patch, stack or playbacks.
DMX View DMX line assignments and reserve DMX channels.
Lock Lock a show, preventing recording.
Misc Used for a variety of miscellaneous features such as
setting MIDI In and MIDI Out channels and setting the
time.
The Instrument Menu
The Instrument menu provides functionality to add, edit and delete moving lights within
the system.
DMX Line Assignment
Before controlling instruments with the LP-X, you must configure the system with the
correct numbers and types of instruments. DMX line assignment locates a moving light
instrument at a specific DMX address.
The LP-X24 drives one DMX line with 512 channels. By default, the first 100 DMX
channels are reserved for conventional lights
a setting that can be changed if desired.