Canon XLH1 - Manual (Page 115)

115
Using a Memory Card
E
Capturing a Still Image from a Tape
While you are playing back a tape, you can capture the same picture as a still image on the memory
card.
1. Open the menu and select [RECORDING SETUP]. Select [STILL I.REC], set it to [ON]
or [ON+CP DATA] and close the menu.
2. While you are playing back the tape, press the PHOTO button.
Screen Displays during Still Image Recording
MENU
( 29)
RECORDING SETUP STILL I. REC•OFF
Metering Method Icon
Indicates the metering mode currently selected for
recording still images.
Drive Mode Icon
Indicates the drive mode currently selected for
recording still images.
Remaining Card Capacity for Still Images
flashing in red: No card
in green: 6 or more images
in yellow: 1 to 5 images
in red: No more images
• The indication may not decrease even though a
recording has been made, or may decrease by 2
images at once.
• All indicators are displayed in green when a memory
card is played back.
“ ” Card Access Display
Indicates that the camcorder is writing on the memory
card.
Image Quality and Size
Indicates the quality and size currently selected for
recording still images.