Control elements – LD Systems LAX 16 D User Manual

Page 7

ALIANO

POLSKI

ESP
AÑOL

FRANCAIS

DEUTSCH

ENGLISH

CONTROL ELEMENTS:

MONO CHANNELS (MIC/LINE)
The mono channels offer balanced XLR connectors for low-impedance micro-
phones and other low-level equipment. In addition, there are 6.3 mm TRS jack
input connectors for microphones and line level equipment (e.g., synthesizers,
drum computers, effects processors, etc.). Synthesizer, Drum-Computer,
Effektprozessoren etc.) zur Verfügung.
Important: The MIC and LINE inputs cannot be used simultaneously on the
same channel.
+48V PHANTOM POWER
The XLR inputs on the mono channels provide +48V phantom power for
condenser microphones.
Important: Never connect a microphone without phantom power to the XLR
input when phantom power is on.

INPUT GAIN ADJUSTMENT
The input gain control has two different scales: one for microphones and one
GPSMJOFMFWFMEFWJDFT5IFPVUFSSJOH _E#SFGFSTUPNJDSPQIPOFT UIF
JOOFSPOF _E#UPMJOFMFWFMEFWJDFT"MXBZTBEKVTUUIFHBJODPOUSPM
so that the peak LED above the channel fader lights up only occasionally. If the
LED is on constantly, this can lead to distortion.

LOW CUT FILTER
5IF-08$65CVUUPOBDUJWBUFTBMPXDVUmMUFS )[ TMPQFE#PDUBWFGPS
reducing low-frequency noise such as mains hum or handling noises from
vocal microphones.

STEREO CHANNELS
The stereo channels are conﬁgured as stereo pairs with 6.3 mm TRS jack
input connectors. Mono signal sources should be connected to the left jack
input connector.

+4 dBu/-10 dBV SELECTION
The line inputs of the stereo channels have a button for selecting the input
TFOTJUJWJUZ E#VGPSQSPGFTTJPOBMBVEJPFRVJQNFOU E#7GPSHFOFSBMIJm
devices, etc.). If you are uncertain which setting to use for the respectively
DPOOFDUFEEFWJDF mSTUUSZE#V*GUIFMFWFMJTUPPMPX TXJUDIUPE#W

AUX SENDS
These 6.3 mm TRS sockets can be used to split the signal and send it additio-
nally to external effects processors or the like. In addition, these outputs can
be used as submix outputs.

LINE IN 1

BAL OR

UNBAL

LINE

MIC

+15dB

-25dB

0dB

40dB

LOW CUT

75Hz 18dB/Oct

MIC 1

LINE IN 19/20

+4dBu

-10dBV

LEFT(MONO)

RIGHT

AUX SENDS

PHONE