LD Systems LAX 16 D - Manual (Page 10)

10
ENGLISH
DEUTSCH
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
ESP
AÑOL
POLSKI
IT
ALIANO
18 CHANNEL FADER
This fader controls the overall volume of the respective channel, i.e., the level at which the signal is sent to
the main mix.
19 2-TRACK IN/OUT
TAPE IN: Use the TAPE IN input to connect a tape recorder or DAT recorder. Press the 2TK IN button on the front
panel to send the signal coming from the connected device to the PHONES/CONTROL ROOM output or the 2TK TO
MAIN MIX button to send it to the MAIN MIX output.
TAPE OUT: The mix can be output to a tape recorder via these cinch (RCA) connectors.
2TK IN CONTROL: This control is used to adjust the level of the 2TK IN signal, which can be varied from ∞ to MAX.
20 STEREO AUX RETURNS
These 6.3 mm jack (TRS) sockets are primarily used to return the audio signal from an external effects processer
to the mixer (MAIN MIX). In addition, these connectors can be used as additional AUX inputs. Note: If no connector
is plugged into Aux Return 2, the signal of the internal effects processor is present on Aux Return 2.
CONTROL ELEMENTS:
LEFT LEFT(MONO)
RIGHT
STEREO AUX RETURNS
2 1
RIGHT TAPE IN TAPE OUT
2-TRACK IN/OUT
MAX
2TK IN
R
L
20 19