Networking basics, Check your ip address, Networking.basics – D-Link DIR-825 User Manual

Page 98

Text mode
Original mode

D-Lnk DIR-825 User Manual

Appendx B - Networkng Bascs

Networking Basics

Check your IP address

After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a
DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.

Click on

Start > Run. In the run box type cmd and click OK. (Windows Vista

users type cmd in the

Start.Search

box.)

At the prompt, type

ipconfig and press Enter.

This will display the IP address, subnet mask, and
the default gateway of your adapter.

If the address is 0.0.0.0, check your adapter
installation, security settings, and the settings
on your router. Some firewall software programs
may block a DHCP request on newly installed
adapters.