Network filters – D-Link DIR-825 User Manual

Page 44

Text mode
Original mode

D-Lnk DIR-825 User Manual

Secton - Configuraton

Network Filters

Select

.Turn.MAC.Filtering.Off, Allow.MAC.

addresses. listed. below, or Deny. MAC.
addresses.listed.below from the drop-down
menu.

Enter the MAC address you would like to
filter.

To find the MAC address on a computer,
please refer to the Networking Basics section
in this manual.

Select a DHCP client from the drop-down menu
and click

<< to copy that MAC Address.

Click to remove the MAC address.

Configure MAC

Filtering:

MAC Address:

DHCP Client:

Clear:

Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses
from accessing the network. You can either manually add a MAC address or select the MAC address from the list of
clients that are currently connected to the Broadband Router.