D-Link DIR-825 - Manual (Page 86)

82 D-Lnk DIR-825 User Manual
Secton 5 - Connectng to a Wreless Network
Connect to a Wireless Network
Using Windows ® XP
Windows ® XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for
Service Pack 2 users. If you are using another company’s utility or Windows ® 2000, please refer to the user manual
of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option
similar to the Windows
® XP utility as seen below.
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select
View. Available.
Wireless.Networks.
If you receive the Wireless.Networks.Detected bubble, click on
the center of the bubble to access the utility.
or
The utility will display any available wireless networks in your
area. Click on a network (displayed using the SSID) and click the
Connect button.
If you get a good signal but cannot access the Internet, check you
TCP/IP settings for your wireless adapter. Refer to the
Networking.
Basics section in this manual for more information.