D-Link DIR-825 User Manual
Page 92
88
D-Lnk DIR-825 User Manual
Secton - Troubleshootng
You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a
fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example,
lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network
we’re working with (1452+28=1480).
Once you find your MTU, you can now configure your router with the proper MTU size.
To change the MTU rate on your router follow the steps below:
• Open your browser, enter the IP address of your router (192.168.0.1) and click
OK.
• Enter your username (admin) and password (blank by default). Click
OK to enter the web configuration
page for the device.
• Click on
Setup and then click Manual.Configure.
• To change the MTU enter the number in the MTU field and click
Save.Settings to save your settings.
• Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in
increments of ten.