D-Link DIR-825 - Manual (Page 40)

D-Lnk DIR-825 User Manual
Secton - Configuraton
This will allow you to open a single port or a range of ports.
Port Forwarding
Enter a name for the rule or select an application
from the drop-down menu. Select an application
and click
<< to populate the fields.
Enter the IP address of the computer on your
local network that you want to allow the incoming
service to. If your computer is receiving an IP
address automatically from the router (DHCP),
you computer will be listed in the “Computer
Name” drop-down menu. Select your computer
and click
<<.
Enter the TCP and/or UDP port or ports that you
want to open. You can enter a single port or a
range of ports. Separate ports with a common.
Example: 24,1009,3000-4000
The schedule of time when the Virtual Server
Rule will be enabled. The schedule may be set
to Always, which will allow the particular service
to always be enabled. You can create your own
times in the
Tools > Schedules section.
Select Allow. All (most common) or a created
Inbound filter. You may create your own inbound
filters in the
Advanced.>.Inbound.Filter page.
Name:
IP Address:
TCP/UDP:
Schedule:
Inbound Filter: