Dimplex Fireplace DFG3033 - Manual (Page 17)

17
Maintenance
that some of the glass media
may fall out of the tray (Figure
9).
upper bulbs are located in
2.
the upper left and upper right
corners of fireplace (Figure
9).
Remove the upper light cover
3.
for each bulb (two (2) Philips
screws each).
unscrew bulb(s) counter
4.
clockwise.
Insert new bulb(s).
5.
Re-install upper light bracket. 6.
Replace glass assembly. 7.
glass Cleaning
The glass is cleaned in the factory
during the assembly operation.
During shipment, installation,
handling, etc., the glass may
collect dust particles; these can
be removed by dusting lightly with
a clean dry cloth.
To remove fingerprints or other
marks, the glass can be cleaned
with a damp cloth. To prevent
scratching, do not use abrasive
cleaners or spray liquids on the
glass surface.
Figure 10
Exploded view to show detail
Flicker Rod
Flicker
Motor
bulbs (3)
Insert new bulb(s). 7.
Push flicker rod back onto 8.
motor shaft and replace
opposite end of flicker rod
back into support bracket.
Replace media tray back into
9.
firebox.
Gently pour and evenly
10.
spread the glass media.
Replace glass assembly.
11.
Upper Light Bulb
Requirements
Quantity of two (2) clear
chandelier or candelabra bulbs
with an E-12 (small) socket base,
15 Watt rating.
Do not exceed 15 Watts per
bulb.
To access the upper light bulb
area:
Carefully remove the front 1.
glass assembly. be aware