Dimplex Fireplace DFG3033 - Manual (Page 14)

14 www.dimplex.com
Operation
Figure 7 - Remote Control Functions
a. Room Temperature
b. set Temperature
C. Dimmer
D. Flame speed Control
E. sleep Timer
F. Flame & heat on/off
G. Temperature Down
h. Temperature up
I.
Dimmer Down
J. Dimmer up
K. Flame speed Down
L. Flame speed up
M. sleep Timer Down
n. sleep Timer up
K
J
L
I
b
E
a
D
G
C
n M
h
F
To set the sleep timer press the N
button.
set the timer from 30 minutes
through 8 hours. The fireplace
will automatically turn off when
the sleep timer reaches zero (0)
minutes.
The sleep Timer can be cancelled
at any time by pressing the M
button repeatedly until the sleep
timer displays nothing.
WARNINg: Disconnect
power before attempting any
maintenance or cleaning to
reduce the risk of fire, electric
shock or damage to persons.
F. Flame & Heat On/Off
Button
Press the F button to turn the
Flame/heat function on. When
B is higher then A the heat will
come on. To turn the heat off,
lower the B so that it’s setting is
lower then the A. The default
temperature setting is 72°F
(22°C).
!
NOTE: When using the
remote control the heater runs
on a thermostat. Press the
H or g buttons to adjust the
set temperature. once the
desired set temperature is